Enchufes

Los sockets son una tecnología de transferencia de datos de bajo nivel sobre la que se implementan muchos protocolos de red. Windows ofrece clases de socket TCP y UDP para aplicaciones cliente-servidor o punto a punto, tanto si las conexiones son de larga duración como si no se requiere una conexión establecida.

Este tema se centra en cómo usar las clases de sockets de Windows que se encuentran en el espacio de nombres Windows.Networking.Sockets. Pero también puedes usar Windows Sockets 2 (Winsock) en una aplicación Windows.

Note

como consecuencia del aislamiento de la red, Windows no permite establecer una conexión de socket (Sockets o WinSock) entre dos aplicaciones de Windows que se ejecutan en el mismo equipo, ya sea mediante la dirección local de loopback (127.0.0.1) o especificando explícitamente la dirección IP local. Para obtener más información sobre los mecanismos por los que las aplicaciones Windows pueden comunicarse entre sí, consulte Comunicación entre aplicaciones.

Creación de un servidor y un cliente de socket TCP básico

Un socket TCP (Protocolo de control de transmisión) proporciona transferencias de datos de red de bajo nivel en cualquier dirección para las conexiones de larga duración. Los sockets TCP son la característica subyacente usada por la mayoría de los protocolos de red usados en Internet. Para demostrar las operaciones TCP básicas, el código de ejemplo siguiente muestra un objeto StreamSocket y streamSocketListener que envía y recibe datos a través de TCP para formar un cliente y servidor de eco.

Para empezar con cuantos elementos móviles como sea posible (y para evitar problemas de aislamiento de red para el presente), cree un nuevo proyecto y coloque tanto el cliente como el código de servidor siguiente en el mismo proyecto.

Deberá declarar una funcionalidad de aplicación en el proyecto. Abra el archivo de origen del manifiesto del paquete de la aplicación (el Package.appxmanifest archivo) y, en la pestaña Capacidades, active Redes privadas (cliente y servidor). Así es como se ve en el Package.appxmanifest lenguaje de marcado.

<Capability Name="privateNetworkClientServer" />

En lugar de privateNetworkClientServer, puede declarar internetClientServer si se conecta por internet. Tanto StreamSocket como StreamSocketListener necesitan declarar una u otra de estas funcionalidades de aplicación.

Un cliente y un servidor de eco que utilizan sockets TCP

Construya un streamSocketListener y comience a escuchar las conexiones TCP entrantes. El evento StreamSocketListener.ConnectionReceived se genera cada vez que un cliente establece una conexión con StreamSocketListener.

Además, construya un objeto StreamSocket, establezca una conexión con el servidor, envíe una solicitud y reciba una respuesta.

Cree una nueva página denominada StreamSocketAndListenerPage. Coloque el marcado XAML en StreamSocketAndListenerPage.xamly coloque el código imperativo dentro de la StreamSocketAndListenerPage clase .

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="TCP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="StreamSocket &amp; StreamSocketListener"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose an arbitrary port number.
static string PortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();

        // The ConnectionReceived event is raised when connections are received.
        streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;

        // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
        await streamSocketListener.BindServiceNameAsync(StreamSocketAndListenerPage.PortNumber);

        this.serverListBox.Items.Add("server is listening...");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    string request;
    using (var streamReader = new StreamReader(args.Socket.InputStream.AsStreamForRead()))
    {
        request = await streamReader.ReadLineAsync();
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = args.Socket.OutputStream.AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the StreamSocket and establish a connection to the echo server.
        using (var streamSocket = new Windows.Networking.Sockets.StreamSocket())
        {
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            var hostName = new Windows.Networking.HostName("localhost");

            this.clientListBox.Items.Add("client is trying to connect...");

            await streamSocket.ConnectAsync(hostName, StreamSocketAndListenerPage.PortNumber);

            this.clientListBox.Items.Add("client connected");

            // Send a request to the echo server.
            string request = "Hello, World!";
            using (Stream outputStream = streamSocket.OutputStream.AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));

            // Read data from the echo server.
            string response;
            using (Stream inputStream = streamSocket.InputStream.AsStreamForRead())
            {
                using (StreamReader streamReader = new StreamReader(inputStream))
                {
                    response = await streamReader.ReadLineAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\" ", response));
        }

        this.clientListBox.Items.Add("client closed its socket");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_streamSocketListener.ConnectionReceived({ this, &StreamSocketAndListenerPage::OnConnectionReceived });

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            co_await m_streamSocketListener.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is listening..."));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs args)
    {
        try
        {
            auto socket{ args.Socket() }; // Keep the socket referenced, and alive.
            DataReader dataReader{ socket.InputStream() };

            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));

            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring request = dataReader.ReadString(bytesLoaded);

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            // Echo the request back as the response.
            DataWriter dataWriter{ socket.OutputStream() };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            m_streamSocketListener = nullptr;

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
            });
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
            });
        }
    }

    IAsyncAction StartClient()
    {
        try
        {
            // Establish a connection to the echo server.

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is trying to connect..."));

            co_await m_streamSocket.ConnectAsync(hostName, L"1337");
            clientListBox().Items().Append(winrt::box_value(L"client connected"));

            // Send a request to the echo server.
            DataWriter dataWriter{ m_streamSocket.OutputStream() };
            winrt::hstring request{ L"Hello, World!" };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);

            co_await dataWriter.StoreAsync();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            co_await dataWriter.FlushAsync();
            dataWriter.DetachStream();

            // Read data from the echo server.
            DataReader dataReader{ m_streamSocket.InputStream() };
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));
            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring response{ dataReader.ReadString(bytesLoaded) };

            wstringstream.str(L"");
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_streamSocket = nullptr;

            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();

            // The ConnectionReceived event is raised when connections are received.
            streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &StreamSocketAndListenerPage::StreamSocketListener_ConnectionReceived);

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            Concurrency::create_task(streamSocketListener->BindServiceNameAsync(L"1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is listening...");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        try
        {
            auto dataReader = ref new DataReader(args->Socket->InputStream);

            Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                [=](unsigned int bytesLoaded)
            {
                unsigned int stringLength = dataReader->ReadUInt32();
                Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                    [=](unsigned int bytesLoaded)
                {
                    Platform::String^ request = dataReader->ReadString(bytesLoaded);
                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                        [=]
                    {
                        std::wstringstream wstringstream;
                        wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                        this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                    }));

                    // Echo the request back as the response.
                    auto dataWriter = ref new DataWriter(args->Socket->OutputStream);
                    dataWriter->WriteUInt32(request->Length());
                    dataWriter->WriteString(request);
                    Concurrency::create_task(dataWriter->StoreAsync()).then(
                        [=](unsigned int)
                    {
                        dataWriter->DetachStream();

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                            [=]()
                        {
                            std::wstringstream wstringstream;
                            wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                        }));

                        delete this->streamSocketListener;
                        this->streamSocketListener = nullptr;

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message); }));
        }
    }

    void StartClient()
    {
        try
        {
            // Create the StreamSocket and establish a connection to the echo server.
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is trying to connect...");

            Concurrency::create_task(this->streamSocket->ConnectAsync(hostName, L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->clientListBox->Items->Append(L"client connected");

                // Send a request to the echo server.
                auto dataWriter = ref new DataWriter(this->streamSocket->OutputStream);
                auto request = ref new Platform::String(L"Hello, World!");
                dataWriter->WriteUInt32(request->Length());
                dataWriter->WriteString(request);

                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](Concurrency::task< unsigned int >)
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    Concurrency::create_task(dataWriter->FlushAsync()).then(
                        [=](Concurrency::task< bool >)
                    {
                        dataWriter->DetachStream();

                        // Read data from the echo server.
                        auto dataReader = ref new DataReader(this->streamSocket->InputStream);
                        Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                            [=](unsigned int bytesLoaded)
                        {
                            unsigned int stringLength = dataReader->ReadUInt32();
                            Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                                [=](unsigned int bytesLoaded)
                            {
                                Platform::String^ response = dataReader->ReadString(bytesLoaded);
                                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                                    [=]
                                {
                                    std::wstringstream wstringstream;
                                    wstringstream << L"client received the response: \"" << response->Data() << L"\"";
                                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                                    delete this->streamSocket;
                                    this->streamSocket = nullptr;

                                    this->clientListBox->Items->Append(L"client closed its socket");
                                }));
                            });
                        });
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

Referencias a StreamSockets en continuaciones de PPL de C++ (se aplica a C++/CX, principalmente)

Note

Si usa corrutinas de C++/WinRT y pasa parámetros por valor, este problema no se aplica. Para obtener recomendaciones de paso de parámetros, consulte Operaciones asincrónicas y de simultaneidad con C++/WinRT.

Un StreamSocket permanece activo mientras haya una operación activa de lectura o escritura en sus secuencias de entrada o salida (tomemos como ejemplo el StreamSocketListenerConnectionReceivedEventArgs.Socket al que puede acceder en el controlador de eventos StreamSocketListener.ConnectionReceived). Al llamar a DataReader.LoadAsync (o ReadAsync/WriteAsync/StoreAsync), se mantiene una referencia al socket (a través del flujo de entrada del socket) hasta que el controlador del evento Completed (si lo hay) de LoadAsync termine de ejecutarse.

La Parallel Patterns Library (PPL) no programa las continuaciones de tareas en línea de forma predeterminada. En otras palabras, agregar una tarea de continuación (con task::then()) no garantiza que la tarea de continuación se ejecute en línea como controlador de finalización.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);
    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        // Work in here isn't guaranteed to execute inline as the completion handler of the LoadAsync.
    });
}

Desde la perspectiva de la StreamSocket, el controlador de finalización se realiza en ejecución (y el socket es apto para su eliminación) antes de que se ejecuta el cuerpo de la continuación. Por lo tanto, para evitar que el socket se elimine si quiere usarlo dentro de esa continuación, necesita hacer referencia al socket directamente (a través de la captura de lambda) y usarla, o indirectamente (continuar accediendo a args->Socket dentro de continuaciones), o forzar tareas de continuación para que estar en línea. Puede ver la primera técnica (captura lambda) en acción en el ejemplo StreamSocket. El código de C++/CX de la sección anterior Crear un cliente y un servidor básicos de socket TCP utiliza la segunda técnica: reenvía la solicitud como respuesta y accede a args->Socket desde una de las continuaciones más internas.

La tercera técnica es apropiada cuando no está reproduciendo una respuesta. Use la opción task_continuation_context::use_synchronous_execution() para forzar PPL a ejecutar el cuerpo de continuación en línea. Este es un ejemplo de código que muestra cómo hacerlo.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);

    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        unsigned int messageLength = dataReader->ReadUInt32();
        Concurrency::create_task(dataReader->LoadAsync(messageLength)).then(
            [=](unsigned int bytesLoaded)
        {
            Platform::String^ request = dataReader->ReadString(bytesLoaded);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                [=]
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
            }));
        });
    }, Concurrency::task_continuation_context::use_synchronous_execution());
}

Este comportamiento se aplica a todas las clases de sockets y WebSockets del espacio de nombres Windows.Networking.Sockets. Pero los escenarios del lado cliente suelen almacenar sockets en variables de miembro, por lo que el problema es más aplicable al escenario StreamSocketListener.ConnectionReceived , como se muestra anteriormente.

Creación de un servidor y un cliente de socket UDP básico

Un socket UDP (protocolo de datagramas de usuario) es similar a un socket TCP en que también proporciona transferencias de datos de red de bajo nivel en cualquier dirección. Pero, mientras que un socket TCP es para conexiones de larga duración, un socket UDP es para las aplicaciones en las que no se requiere una conexión establecida. Dado que los sockets UDP no mantienen la conexión en ambos puntos de conexión, son una solución rápida y sencilla para las redes entre máquinas remotas. Pero los sockets UDP no garantizan la integridad de los paquetes de red ni siquiera que los paquetes lleguen al destino remoto. Por lo tanto, la aplicación tendrá que diseñarse para tolerarlo. Algunos ejemplos de aplicaciones que usan sockets UDP son la detección de redes locales y los clientes de chat locales.

Para demostrar las operaciones básicas de UDP, el código de ejemplo siguiente muestra la clase DatagramSocket que se usa para enviar y recibir datos a través de UDP para formar un cliente de eco y un servidor. Cree un nuevo proyecto y coloque tanto el cliente como el código de servidor siguiente en el mismo proyecto. Al igual que para un socket TCP, deberá declarar la funcionalidad de la aplicación Redes privadas (cliente y servidor).

Un cliente y un servidor de eco que usan sockets UDP

Construya un DatagramSocket para desempeñar el rol del servidor de eco, enlazarlo a un número de puerto específico, escuchar un mensaje UDP entrante y devolverlo. El evento DatagramSocket.MessageReceived se genera cuando se recibe un mensaje en el socket.

Construya otro datagramSocket para desempeñar el rol del cliente de eco, enlazarlo a un número de puerto específico, enviar un mensaje UDP y recibir una respuesta.

Cree una nueva página denominada DatagramSocketPage. Coloque el marcado XAML en DatagramSocketPage.xamly coloque el código imperativo dentro de la DatagramSocketPage clase .

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="UDP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="DatagramSocket"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose different arbitrary port numbers for client and server, since both will be running on the same machine.
static string ClientPortNumber = "1336";
static string ServerPortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        // The ConnectionReceived event is raised when connections are received.
        serverDatagramSocket.MessageReceived += ServerDatagramSocket_MessageReceived;

        this.serverListBox.Items.Add("server is about to bind...");

        // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
        await serverDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ServerPortNumber);

        this.serverListBox.Items.Add(string.Format("server is bound to port number {0}", DatagramSocketPage.ServerPortNumber));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ServerDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string request;
    using (DataReader dataReader = args.GetDataReader())
    {
        request = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = (await sender.GetOutputStreamAsync(args.RemoteAddress, DatagramSocketPage.ClientPortNumber)).AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the DatagramSocket and establish a connection to the echo server.
        var clientDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        clientDatagramSocket.MessageReceived += ClientDatagramSocket_MessageReceived;

        // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
        var hostName = new Windows.Networking.HostName("localhost");

        this.clientListBox.Items.Add("client is about to bind...");

        await clientDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ClientPortNumber);

        this.clientListBox.Items.Add(string.Format("client is bound to port number {0}", DatagramSocketPage.ClientPortNumber));

        // Send a request to the echo server.
        string request = "Hello, World!";
        using (var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket())
        {
            using (Stream outputStream = (await serverDatagramSocket.GetOutputStreamAsync(hostName, DatagramSocketPage.ServerPortNumber)).AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }
        }

        this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ClientDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string response;
    using (DataReader dataReader = args.GetDataReader())
    {
        response = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    DispatcherQueue.TryEnqueue(() => this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\"", response)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.clientListBox.Items.Add("client closed its socket"));
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket m_clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket m_serverDatagramSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_serverDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived });

            serverListBox().Items().Append(winrt::box_value(L"server is about to bind..."));

            // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
            co_await m_serverDatagramSocket.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is bound to port number 1337"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring request{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };

        serverListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        // Echo the request back as the response.
        IOutputStream outputStream = co_await sender.GetOutputStreamAsync(args.RemoteAddress(), L"1336");
        DataWriter dataWriter{ outputStream };
        dataWriter.WriteString(request);

        co_await dataWriter.StoreAsync();
        dataWriter.DetachStream();

        serverListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_serverDatagramSocket = nullptr;

            serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
        });
    }

    IAsyncAction StartClient()
    {
        try
        {
            m_clientDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived });

            // Establish a connection to the echo server.
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is about to bind..."));

            co_await m_clientDatagramSocket.BindServiceNameAsync(L"1336");
            clientListBox().Items().Append(winrt::box_value(L"client is bound to port number 1336"));

            // Send a request to the echo server.
            IOutputStream outputStream = co_await m_clientDatagramSocket.GetOutputStreamAsync(hostName, L"1337");

            winrt::hstring request{ L"Hello, World!" };
            DataWriter dataWriter{ outputStream };
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket const& /* sender */, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring response{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };
        clientListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        m_clientDatagramSocket = nullptr;

        clientListBox().DispatcherQueue().TryEnqueue([=]()
        {
            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        });
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket^ clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket^ serverDatagramSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            // The ConnectionReceived event is raised when connections are received.
            this->serverDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived);

            this->serverListBox->Items->Append(L"server is about to bind...");

            // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
            Concurrency::create_task(this->serverDatagramSocket->BindServiceNameAsync("1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is bound to port number 1337");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ request = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request->Data() << L"\"";
            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        // Echo the request back as the response.
        Concurrency::create_task(sender->GetOutputStreamAsync(args->RemoteAddress, "1336")).then(
            [=](IOutputStream^ outputStream)
        {
            auto dataWriter = ref new DataWriter(outputStream);
            dataWriter->WriteString(request);
            Concurrency::create_task(dataWriter->StoreAsync()).then(
                [=](unsigned int)
            {
                dataWriter->DetachStream();

                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                    [=]()
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                    this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    delete this->serverDatagramSocket;
                    this->serverDatagramSocket = nullptr;

                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                }));
            });
        });
    }

    void StartClient()
    {
        try
        {
            // Create the DatagramSocket and establish a connection to the echo server.
            this->clientDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            this->clientDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived);

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is about to bind...");

            Concurrency::create_task(this->clientDatagramSocket->BindServiceNameAsync("1336")).then(
                [=]
            {
                this->clientListBox->Items->Append(L"client is bound to port number 1336");
            });

            // Send a request to the echo server.
            auto serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();
            Concurrency::create_task(serverDatagramSocket->GetOutputStreamAsync(hostName, "1337")).then(
                [=](IOutputStream^ outputStream)
            {
                auto request = ref new Platform::String(L"Hello, World!");
                auto dataWriter = ref new DataWriter(outputStream);
                dataWriter->WriteString(request);
                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](unsigned int)
                {
                    dataWriter->DetachStream();
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                });

            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ response = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response->Data() << L"\"";
            this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        delete this->clientDatagramSocket;
        this->clientDatagramSocket = nullptr;

        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->clientListBox->Items->Append(L"client closed its socket"); }));
    }

Operaciones en segundo plano y agente de sockets

Puede usar al agente de socket y controlar los desencadenadores de canal, para garantizar que su aplicación reciba correctamente las conexiones o los datos en sockets mientras no estén en primer plano. Para obtener más información, consulta Comunicaciones de red en segundo plano.

Envíos por lotes

Cada vez que escribes en el flujo asociado a un socket, se produce una transición del modo de usuario (tu código) al modo de kernel (donde está la pila de red). Si está escribiendo muchos búferes a la vez, estas transiciones repetidas se combinan en una sobrecarga considerable. El procesamiento por lotes de los envíos es una manera de enviar varios búferes de datos juntos y evitar esa sobrecarga. Es especialmente útil si la aplicación realiza VoIP, VPN u otras tareas que implican mover una gran cantidad de datos de la manera más eficaz posible.

En esta sección se muestran un par de técnicas de envío por lotes que puede usar con streamSocket o datagramSocket conectado.

Para obtener una línea base, veamos cómo enviar un gran número de búferes de forma ineficaz. Esta es una demostración mínima, con streamSocket.

protected override async void OnNavigatedTo(NavigationEventArgs e)
{
    var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();
    streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;
    await streamSocketListener.BindServiceNameAsync("1337");

    var streamSocket = new Windows.Networking.Sockets.StreamSocket();
    await streamSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "1337");
    this.SendMultipleBuffersInefficiently(streamSocket, "Hello, World!");
    //this.BatchedSendsCSharpOnly(streamSocket, "Hello, World!");
    //this.BatchedSendsAnyUWPLanguage(streamSocket, "Hello, World!");
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    using (var dataReader = new DataReader(args.Socket.InputStream))
    {
        dataReader.InputStreamOptions = InputStreamOptions.Partial;
        while (true)
        {
            await dataReader.LoadAsync(256);
            if (dataReader.UnconsumedBufferLength == 0) break;
            IBuffer requestBuffer = dataReader.ReadBuffer(dataReader.UnconsumedBufferLength);
            string request = Windows.Security.Cryptography.CryptographicBuffer.ConvertBinaryToString(Windows.Security.Cryptography.BinaryStringEncoding.Utf8, requestBuffer);
            Debug.WriteLine(string.Format("server received the request: \"{0}\"", request));
        }
    }
}

// This implementation incurs kernel transition overhead for each packet written.
private async void SendMultipleBuffersInefficiently(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    foreach (IBuffer packet in packetsToSend)
    {
        await streamSocket.OutputStream.WriteAsync(packet);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Security.Cryptography.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    IAsyncAction OnNavigatedTo(NavigationEventArgs /* e */)
    {
        m_streamSocketListener.ConnectionReceived({ this, &BatchedSendsPage::OnConnectionReceived });
        co_await m_streamSocketListener.BindServiceNameAsync(L"1337");

        co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337");
        SendMultipleBuffersInefficientlyAsync(L"Hello, World!");
        //BatchedSendsAnyUWPLanguageAsync(L"Hello, World!");
    }

private:
    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener const& /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.Socket().InputStream() };
        dataReader.InputStreamOptions(Windows::Storage::Streams::InputStreamOptions::Partial);

        while (true)
        {
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(256);
            if (bytesLoaded == 0) break;
            winrt::hstring message{ dataReader.ReadString(bytesLoaded) };
            ::OutputDebugString(message.c_str());
        }
    }

    // This implementation incurs kernel transition overhead for each packet written.
    IAsyncAction SendMultipleBuffersInefficientlyAsync(winrt::hstring message)
    {
        co_await winrt::resume_background();

        std::vector< IBuffer > packetsToSend;
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto const& element : packetsToSend)
        {
            m_streamSocket.OutputStream().WriteAsync(element).get();
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();
        streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &BatchedSendsPage::StreamSocketListener_ConnectionReceived);
        Concurrency::create_task(this->streamSocketListener->BindServiceNameAsync(L"1337")).then(
            [=]
        {
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();
            Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->SendMultipleBuffersInefficiently(L"Hello, World!");
                // this->BatchedSendsAnyUWPLanguage(L"Hello, World!");
            }, Concurrency::task_continuation_context::use_synchronous_execution());
        });
    }

private:
    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        auto dataReader = ref new DataReader(args->Socket->InputStream);
        dataReader->InputStreamOptions = Windows::Storage::Streams::InputStreamOptions::Partial;
        this->ReceiveStringRecurse(dataReader, args->Socket);
    }

    void ReceiveStringRecurse(DataReader^ dataReader, Windows::Networking::Sockets::StreamSocket^ streamSocket)
    {
        Concurrency::create_task(dataReader->LoadAsync(256)).then(
            [this, dataReader, streamSocket](unsigned int bytesLoaded)
        {
            if (bytesLoaded == 0) return;
            Platform::String^ message = dataReader->ReadString(bytesLoaded);
            ::OutputDebugString(message->Data());
            this->ReceiveStringRecurse(dataReader, streamSocket);
        });
    }

    // This implementation incurs kernel transition overhead for each packet written.
    void SendMultipleBuffersInefficiently(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            Concurrency::create_task(this->streamSocket->OutputStream->WriteAsync(element)).wait();
        }
    }

Este primer ejemplo de una técnica más eficaz solo es adecuado si usa C#. Cambie OnNavigatedTo para que llame a BatchedSendsCSharpOnly en lugar de SendMultipleBuffersInefficiently o SendMultipleBuffersInefficientlyAsync.

// A C#-only technique for batched sends.
private async void BatchedSendsCSharpOnly(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingTasks = new System.Threading.Tasks.Task[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingTasks[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]).AsTask();
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete.
    System.Threading.Tasks.Task.WaitAll(pendingTasks);
}

Este ejemplo siguiente es adecuado para cualquier lenguaje para UWP, no solo para C#. Se basa en el comportamiento de StreamSocket.OutputStream y DatagramSocket.OutputStream que los lotes envían juntos. Las llamadas técnicas FlushAsync en ese flujo de salida que, a partir de Windows 10, se garantiza que regrese solo después de que todas las operaciones en el flujo de salida hayan finalizado.

// An implementation of batched sends suitable for any UWP language.
private async void BatchedSendsAnyUWPLanguage(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingWrites = new IAsyncOperationWithProgress<uint, uint>[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]);
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    await streamSocket.OutputStream.FlushAsync();
}

// An implementation of batched sends suitable for any UWP language.
IAsyncAction BatchedSendsAnyUWPLanguageAsync(winrt::hstring message)
{
    std::vector< IBuffer > packetsToSend{};
    std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int > > pendingWrites{};
    for (unsigned int count = 0; count < 5; ++count)
    {
        packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
    }

    for (auto const& element : packetsToSend)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites.push_back(m_streamSocket.OutputStream().WriteAsync(element));
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    co_await m_streamSocket.OutputStream().FlushAsync();
}

private:
    // An implementation of batched sends suitable for any UWP language.
    void BatchedSendsAnyUWPLanguage(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int >^ >pendingWrites{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            // track all pending writes as tasks, but don't wait on one before beginning the next.
            pendingWrites.push_back(this->streamSocket->OutputStream->WriteAsync(element));
            // Don't modify any buffer's contents until the pending writes are complete.
        }

        // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
        Concurrency::create_task(this->streamSocket->OutputStream->FlushAsync());
    }

Hay algunas limitaciones importantes impuestas mediante el uso de envíos por lotes en el código.

  • No se puede modificar el contenido de las instancias de IBuffer que se escriben hasta que se complete la escritura asincrónica.
  • El patrón FlushAsync solo funciona en StreamSocket.OutputStream y DatagramSocket.OutputStream.
  • El patrón FlushAsync solo funciona en Windows 10 y en adelante.
  • En otros casos, use Task.WaitAll en lugar del patrón FlushAsync .

Uso compartido de puertos para DatagramSocket

Puedes configurar un DatagramSocket para coexistir con otros sockets de multidifusión win32 o UWP enlazados a la misma dirección o puerto. Para ello, establezca DatagramSocketControl.MulticastOnly en true antes de enlazar o conectar el socket. Puede acceder a una instancia de DatagramSocketControl desde el propio objeto DatagramSocket a través de su propiedad DatagramSocket.Control .

Proporcionar un certificado de cliente con la clase StreamSocket

StreamSocket admite el uso de SSL/TLS para autenticar el servidor al que está hablando la aplicación cliente. En algunos casos, la aplicación cliente debe autenticarse en el servidor mediante un certificado de cliente SSL/TLS. Puede proporcionar un certificado de cliente con la propiedad StreamSocketControl.ClientCertificate antes de enlazar o conectar el socket (debe establecerse antes de que se inicie el protocolo de enlace SSL/TLS). Puede acceder a una instancia de StreamSocketControl desde el propio objeto StreamSocket a través de su propiedad StreamSocket.Control . Si el servidor solicita el certificado de cliente, Windows responderá con el certificado de cliente que proporcionó.

Use una invalidación de StreamSocket.ConnectAsync que toma un SocketProtectionLevel, como se muestra en este ejemplo de código mínimo.

Important

Como se indica en el comentario de los ejemplos de código siguientes, el proyecto debe declarar la funcionalidad de la aplicación sharedUserCertificates para que este código funcione.

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
var certificateQuery = new Windows.Security.Cryptography.Certificates.CertificateQuery();
certificateQuery.StoreName = "MY";
IReadOnlyList<Windows.Security.Cryptography.Certificates.Certificate> certificates = await Windows.Security.Cryptography.Certificates.CertificateStores.FindAllAsync(certificateQuery);
if (certificates.Count > 0)
{
    streamSocket.Control.ClientCertificate = certificates[0];
    await streamSocket.ConnectAsync(hostName, "1337", Windows.Networking.Sockets.SocketProtectionLevel.Tls12);
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
Windows::Security::Cryptography::Certificates::CertificateQuery certificateQuery;
certificateQuery.StoreName(L"MY");
IVectorView< Windows::Security::Cryptography::Certificates::Certificate > certificates = co_await Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery);

if (certificates.Size() > 0)
{
    m_streamSocket.Control().ClientCertificate(certificates.GetAt(0));
    co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12);
    ...
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
auto certificateQuery = ref new Windows::Security::Cryptography::Certificates::CertificateQuery();
certificateQuery->StoreName = L"MY";
Concurrency::create_task(Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery)).then(
    [=](IVectorView< Windows::Security::Cryptography::Certificates::Certificate^ >^ certificates)
{
    if (certificates->Size > 0)
    {
        this->streamSocket->Control->ClientCertificate = certificates->GetAt(0);
        Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12)).then(
            [=]
        {
            ...
        });
    }
});

Control de excepciones

Se devuelve un error en una operación DatagramSocket, StreamSocket o StreamSocketListener como un valor HRESULT . Puede pasar ese valor HRESULT al método SocketError.GetStatus para convertirlo en un valor de enumeración SocketErrorStatus .

La mayoría de los valores de enumeración SocketErrorStatus corresponden a un error devuelto por la operación nativa Windows sockets. La aplicación puede activar los valores de enumeración SocketErrorStatus para modificar el comportamiento de la aplicación en función de la causa de la excepción.

En el caso de los errores de validación de parámetros, puede usar HRESULT de la excepción para obtener información más detallada sobre el error. Los valores HRESULT posibles se muestran en Winerror.h, que se pueden encontrar en la instalación del SDK (por ejemplo, en la carpeta C:\Program Files (x86)\Windows Kits\10\Include\<VERSION>\shared). Para la mayoría de los errores de validación de parámetros, el valor HRESULT devuelto es E_INVALIDARG.

El constructor HostName puede producir una excepción si la cadena pasada no es un nombre de host válido. Por ejemplo, contiene caracteres que no están permitidos, lo cual es probable si el usuario introduce el nombre de host en su aplicación. Cree un HostName dentro de un bloque try/catch. De este modo, si se produce una excepción, la aplicación puede notificar al usuario y solicitar un nuevo nombre de host.

API importantes

Samples

  • Last updated on